TARGET CABLE ACCESSORIES

The target cables serve as the interface between the emulator (MMEVS or MMDS) and the MCU socket in the user's system. Each target cable consists of two or three separately purchased components: flexible PCB cable, target head adapter, and surface mount adapter, if needed.

• Five cables support all package types and pincounts of 68HC(7)05 and 68HC(9)08 microcontrollers
• Combination of flexible and rigid PCB technologies for stronger target-emulator connection without sacrificing cable flexibility
• Impedance-matched to improve signal quality
• Redundant grounds to reduce electromagnetic interference, ground path impedance, and crosstalk
• 15" (390 mm) cable length
  

The device-specific target head adapter completes the target cable ensemble by rerouting the cable signals to match the footprint of the target device.

A SOIC target connection requires a DIP to SOIC surface mount adapter. The SOIC surface mount adapter solders to the user's target system and accepts a DIP target head adapter using an integral DIP socket. Additional SOIC adapters are required for use in more than one target system.

A QFP target connection requires a target adapter, one QFP surface mount adapter (TQPACK), and one TQSOCKET with guide pins. The TQPACK solders to the user's target system. The TQSOCKET fits between the TQPACK and the target adapter to protect the TQPACK pins from damage. All QFP target adapters include one TQPACK and one TQSOCKET. Additional TQPACKs and TQSOCKETs may be purchased separately for use in more than one target system.*

---