DIY_EFI Digest Wednesday, 6 November 1996 Volume 01 : Number 336 In this issue: Need a 15lb/hr injector... Re: Wide range O2 sensors Re: Need a 15lb/hr injector... Re: Need a 15lb/hr injector...hmmm. Fuel injectors Re: Need a 15lb/hr injector... Re: Fuel injectors Re: Need a 151lb/hr injector...hmmm. See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. ---------------------------------------------------------------------- From: Thor Johnson Date: Tue, 5 Nov 1996 09:11:35 -0500 (EST) Subject: Need a 15lb/hr injector... Looking for a 15lb/hr injector (or a way of accomplishing the same)... I spose >15lb would be ok if it isn't too big. Someone was keeping an injector list at www.proffa.cc.tut.fi, but their webserver seems kaput. Does anyone else keep such a list? Just for my notes... What is the conversion factor between lbs/hr and cc's/anything? Thanks! Thor Johnson johnsont@xxx.edu http://falcon.mercer.peachnet.edu/~johnsont Have you seen the WarpMap lately? http://falcon.mercer.peachnet.edu/~johnsont/warpmap ------------------------------ From: Chris Wilson Date: Tue, 05 Nov 1996 18:55:27 GMT Subject: Re: Wide range O2 sensors On Tue, 05 Nov 1996 15:38:38 +1100 Doug Robson apparently said: > i dont know if i responded to this before > bit i beleive 350 AUD Thanks Doug.That is considerably cheaper than the UK.What make / model is this,do you know? Appreciate your time. - -- Chris Wilson Tue, 05 Nov 1996 18:00 GMT Gatesgarth Racing Developments Gatley,Cheshire,U.K. Race Car Preparation and Development http://195.102.33.46/~gategart mailto:chris@xxx.com ------------------------------ From: dzorde@xxx.au Date: Wed, 06 Nov 96 08:30:55 Subject: Re: Need a 15lb/hr injector... The web page is still there, at /~K124476/dataBySubject/Injectors.html From this page there is a further two pages that link to pages on Bosch injectors Dan dzorde@xxx.au P.S. If you still have problems, get back to me and I'll have a look for you, just remember the flow rates listed are all in CM3/min. ______________________________ Reply Separator _________________________________ Subject: Need a 15lb/hr injector... Author: diy_efi@xxx.edu at INTERNET Date: 11/6/96 12:16 AM Looking for a 15lb/hr injector (or a way of accomplishing the same)... I spose >15lb would be ok if it isn't too big. Someone was keeping an injector list at www.proffa.cc.tut.fi, but their webserver seems kaput. Does anyone else keep such a list? Just for my notes... What is the conversion factor between lbs/hr and cc's/anything? Thanks! Thor Johnson johnsont@xxx.edu http://falcon.mercer.peachnet.edu/~johnsont Have you seen the WarpMap lately? http://falcon.mercer.peachnet.edu/~johnsont/warpmap ------------------------------ From: Thor Johnson Date: Tue, 5 Nov 1996 21:49:17 -0500 (EST) Subject: Re: Need a 15lb/hr injector...hmmm. Ok.. The site came back up, and I found a couple of Toyota & Bosch injectors. Using the density of water (a guess anyway), I seem to need a 125 cc/min injector or larger. The list only goes to 133 cc/min, so a couple of questions have appeared: 1. What is the minimum time you can open an injector (was just going to drive it w/ a simple transistor & not mess w/ the NatSemi chips) 2. Does anyone have a list of smaller injectors, and/or a "el-cheapo" type list that Western Auto will understand (ie. I need an injector for a 1982 Ford whatzit... type list)? I have a guy who will let me flow the injectors, but he can't deal with Bosch #'s. Thanks for the help! Though I don't talk much (cuz I don't know much), I have learned alot from listening. Thor Johnson johnsont@xxx.edu http://falcon.mercer.peachnet.edu/~johnsont Have you seen the WarpMap lately? http://falcon.mercer.peachnet.edu/~johnsont/warpmap ------------------------------ From: Jennifer Rose Date: Tue, 5 Nov 1996 19:58:59 -0800 Subject: Fuel injectors Hi Dan What is the complete address of the web page for injectors. Could find it Thanks Vance ------------------------------ From: "John Faubion" Date: Tue, 5 Nov 1996 23:04:02 -0600 Subject: Re: Need a 15lb/hr injector... > Looking for a 15lb/hr injector (or a way of accomplishing the same)... I > spose >15lb would be ok if it isn't too big. Someone was keeping an > injector list at www.proffa.cc.tut.fi, but their webserver seems kaput. > Does anyone else keep such a list? I'm trying to build a list of them. Here is a list of the one I show in the 15 lb/hr range. cc/min lb/hr Bar PSI Use Maker Part # 164 15.60 3.0 44 Buick 3.0 Lucas 62-1016 167 15.86 3.0 44 (Aftermarket) ADS ADS5006I 167 15.87 2.5 37 Caddilac Bosch 0280150217 The Lucas part number is the new style. The old style for that model is 520-7003. > Just for my notes... What is the conversion factor between lbs/hr and > cc's/anything? Multiply lbs/hr by 10.52 to get real close. John Faubion jfaubion@xxx.net ------------------------------ From: dzorde@xxx.au Date: Wed, 06 Nov 96 15:31:54 Subject: Re: Fuel injectors Hope this helps 1. http://proffa.cc.tut.fi/~k124476/dataBySubject/Injectors.html 2. http://proffa.cc.tut.fi/~k124475/injections.html 3. http://www.co.jyu.fi/~rax/suutin.htm Dan dzorde@xxx.au ______________________________ Reply Separator _________________________________ Subject: Fuel injectors Author: diy_efi@xxx.edu at INTERNET Date: 11/6/96 3:07 PM Hi Dan What is the complete address of the web page for injectors. Could find it Thanks Vance ------------------------------ From: RABBITT_Andrew@xxx.au Date: Wed, 6 Nov 1996 16:14:38 est Subject: Re: Need a 151lb/hr injector...hmmm. > Using the density of water (a guess anyway), density of fuel is between 0.73-0.74 g/cc for our Oz 91 octane ULP (very similar in the US) and ~0.76 g/cc for our 96 octane PULP ------------------------------ End of DIY_EFI Digest V1 #336 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi".