DIY_EFI Digest Wednesday, 16 July 1997 Volume 02 : Number 240 In this issue: Re: fuel inj parts from MSD See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. ---------------------------------------------------------------------- From: Rich Mauruschat Date: Wed, 16 Jul 1997 08:22:31 +0100 Subject: Re: fuel inj parts from MSD At 15:37 15/07/97 -0400, you wrote: >I just received a flyer from MSD on fuel management products. >It has some nice stuff, EGO, TEMP, Pumps, regulators, and some tech >notes including drawings of the injector and pocket hole dimensions. > >The most useful tool I saw was a modified drill bit that could cut the >pocket hole for an injector with the correct shape and dimensions in >one shot. > >I saw some other people were interested in FI for single and twin cyl >motorcycle engines. MSD has a set of adapters that let you mount a >standard fuel injector in a 3/4 threaded hole and feed it with a rubber >hose. Its essentially a cap with a hose barb and a threaded pocket >that hook togeather with a wire spring. > >They also sell EGO bungs, injector & EGO connectors and DIY Stainless >steel fuel rail parts. > >the injector pocket drawing is very detailed. Its worth a look > >I do have access to a scanner if anyone wants to see the drawings >but for a freebie catalog its a must have......... > > Robert, Yes please! sounds interesting. Presumably these MSD guys are in the US? How can they be contacted? do they have e-mail? Thanks Richard ------------------------------ End of DIY_EFI Digest V2 #240 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi".