DIY_EFI Digest          Monday, June 28 1999          Volume 04 : Number 384



In this issue:

	Pulse Width Modulation (PWM).
	Re: MSD, studs and Thermostat

See the end of the digest for information on subscribing to the 
DIY_EFI or DIY_EFI-Digest mailing lists.

----------------------------------------------------------------------

Date: Mon, 28 Jun 1999 11:43:32 -0400
From: LS <lens@xxx.com>
Subject: Pulse Width Modulation (PWM).

I am looking for an 8 bit  Micro Controller with PWM capability
at 10-20 Hz for my auto project. 


Most of the popular ones from Intel and Motorola have 
PWM starting at 120 Cycles/sec, mainly for motor control.

Any ideas? I really do not want to control duty cycle in software.

	Thanks Len.

------------------------------

Date: Mon, 28 Jun 1999 09:49:44 -0700
From: "Peter Fenske" <pfenske@xxx.ca>
Subject: Re: MSD, studs and Thermostat

Hi All

We found a copy of MSD inst.. Tnx all.

FYI guys Gm sells a 170 degree thermostat
PN 10220957

If you want metric studs with a 0.48" knurl
DRL sells em 1/2" or 1" longer than stock

Tnx again:peter

------------------------------

End of DIY_EFI Digest V4 #384
*****************************

To subscribe to DIY_EFI-Digest, send the command:

    subscribe diy_efi-digest

in the body of a message to "Majordomo@xxx.  

A non-digest (direct mail) version of this list is also available; to
subscribe to that instead, replace "diy_efi-digest" in the command
 above with "diy_efi".