DIY_EFI Digest Monday, July 5 1999 Volume 04 : Number 398 In this issue: Re: aftermarket EFI comparisons Re: 16 PIN DLC PLUG EFI comparisons See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. ---------------------------------------------------------------------- Date: Mon, 5 Jul 1999 13:03:16 +0200 From: "Espen Hilde" Subject: Re: aftermarket EFI comparisons PLEASE ! Im waiting like a child before christmas!!!! Espen > The May 1999 issue of "GM High-Tech performance" has a comparison of the > DFI, Haltech, Speed-Pro(Felpro), Motec, Holley, and Electromotive EFI > systems as well as AS&M's "CarPROM". > > If I find the motivation, I'll try to scan it tomorrow and post it to the > FTP site. > > Charles Brooks ------------------------------ Date: Mon, 5 Jul 1999 09:24:02 +0000 From: xxalexx@xxx.com Subject: Re: 16 PIN DLC PLUG > Hi all, > Where can I purchase some 16 pin DLC Plugs. It looks like I will be > using pins 4,5,6,9 and 16. I know that "Snap On" sell them for their own > scanners but I want just the plugs. > > Thanks in Advance Richard > Check with a local connector distributor, the Delphi-Packard GM # is 12110252. I can send you one down under for $25 with pins. Pins 4 and 5 or ground 16 is power 6 and 9 or manufacture pins. Also check Wayne McDonald in archives. What car is this? Alex http://www.obd-2.com ------------------------------ Date: Mon, 5 Jul 1999 10:43:52 -0400 From: "C. Brooks" Subject: EFI comparisons My scanner here at home wasn't up to the task. I'll take the article to work and scan the feature comparison table on the scanner there. Charles Brooks ------------------------------ End of DIY_EFI Digest V4 #398 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi".