DIY_EFI Digest Saturday, July 10 1999 Volume 04 : Number 407 In this issue: Injector info aluminum bar stock See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. ---------------------------------------------------------------------- Date: Sat, 10 Jul 1999 09:16:38 -0400 From: "C. Brooks" Subject: Injector info I just uploaded a file called injector.rtf to the FTP site. It's a list of 100+ injectors, with p/n's, applications, and flow rates. I can't take credit for compiling the info though, a friend of mine traded the info for a six-pack of Guiness not sure where he got it but it's been pretty accurate for me . Wouldn't you know it, he wouldn't let me have the info until I delivered the beer! Anyhoo, thought I'd share the info. Charles Brooks ------------------------------ Date: Sat, 10 Jul 1999 07:13:01 -0700 From: Bill Edgeworth Subject: aluminum bar stock You can buy short lengths of aluminum bar stock from a number of the big industrial supply companies like McMaster. In the west there is a company called Metal supermarkets. They have all kinds of stuff on the shelf. even nice stainless steel hi grade tubing that is supposedly used for fuel lines in gas turbines. Don't waste your money on expensive alloys like 6061-t6 or 7075-t6 they are hard to weld. Bill Edgeworth ------------------------------ End of DIY_EFI Digest V4 #407 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi".