DIY_EFI Digest Wednesday, July 14 1999 Volume 04 : Number 413 In this issue: Is my E-mail working? Re: DIY_EFI Digest V4 #412 Re: DIY_EFI Digest V4 #412 See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. ---------------------------------------------------------------------- Date: Tue, 13 Jul 1999 14:06:33 PDT From: "David Sagers" Subject: Is my E-mail working? Noticed that in the last days the digest editions have become very small, 4 to 6 messages per edition. Has anyone else noticed this? Used to be that there was a lot to read, now it's down to a couple of digests per day and only 4 to 6 messages per edition. _______________________________________________________________ Get Free Email and Do More On The Web. Visit http://www.msn.com ------------------------------ Date: Tue, 13 Jul 1999 18:20:57 EDT From: A70Duster@xxx.com Subject: Re: DIY_EFI Digest V4 #412 << The problem is that a MAF meter's output is almost linear where a VAF meter's output is logarithmic >> Not true, I use to believe that until I adapted a MAF to a HC11 for DFI. Get me tons of problems. I finally measured the output of the MAF sensor with an aneometer and the output varied as the square root of the mass of the airflow. Linearized the data and the system worked. See ya, Mike ------------------------------ Date: Tue, 13 Jul 1999 23:52:21 EDT From: JCsDOOR@xxx.com Subject: Re: DIY_EFI Digest V4 #412 Oh no. the air meter is heated wire LH. ill look up spec. at work tomorrow. Jim Crance ------------------------------ End of DIY_EFI Digest V4 #413 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi".