DIY_EFI Digest Wednesday, July 21 1999 Volume 04 : Number 426 In this issue: DIY_EFI Digest V4 #411 RE: 1227730 ecu or 16198262 ecu needed, 687 ecu for sale/trade See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. ---------------------------------------------------------------------- Date: Tue, 13 Jul 1999 05:00:01 -0400 From: DIY_EFI-Digest-Owner@xxx.edu (DIY_EFI Digest) Subject: DIY_EFI Digest V4 #411 DIY_EFI Digest Tuesday, July 13 1999 Volume 04 : Number 411 In this issue: Haltech RE: DIY_EFI Digest V4 #407 Saab 900T AMM (MAF) Swap ecu design See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. - ---------------------------------------------------------------------- Date: Mon, 12 Jul 1999 19:16:35 -0400 From: "C. Brooks" Subject: Haltech Hi all, I was looking through the archives and ran across mention of a group buy for Haltech E6GM's. Are any of the participants still on the list? If you don't mind, I'd like to hear about the unit and what you think of it. What was your application? Did it work out? How do you like the S/W? etc... Charles Brooks - ------------------------------ Date: Mon, 12 Jul 1999 16:02:02 -0700 From: "Stegbauer, Michael" Subject: RE: DIY_EFI Digest V4 #407 > Subject: Injector info > > I just uploaded a file called injector.rtf to the FTP site. It's a list of > 100+ injectors, with p/n's, applications, and flow rates. > > I can't take credit for compiling the info though, a friend of mine traded > the info for a six-pack of Guiness not sure where he got it but it's been > pretty accurate for me . Wouldn't you know it, he wouldn't let me have the > info until I delivered the beer! I'm afraid I have to doubt the reliability of this info... Guiness comes in four-packs. ;-) Mike - ------------------------------ Date: Mon, 12 Jul 1999 20:43:36 -0400 From: bjanesi@xxx.com Subject: Saab 900T AMM (MAF) Swap I've been off this list for some time, but have jumped back on now that I'm in the middle of a project that has some relevance. Specifically, I'm trying to replace the stock Bosch VAF meter in a Merkur XR4Ti (2.3L Ford Turbo) with the MAF (AMM in Saab verbiage) meter from a '86 Saab 900T (16v 2.0L Turbo). My initial thoughts were that I might get lucky and have a plug-n-play swap (with a little electrical work) since the intake consumptions are fairly close. Even though the Saab MAF has an adjustment screw (What specifically does it adjust?), now I'm thinking this is still not likely since I'm hearing the output curves are different between a MAF and VAF. But before I get that far, I still need to define the 6 circuits on the MAF, and their input/output ranges. I have the schematic, but it only tells me where everything goes. The 4 circuits that route to the PCM (LH Jetronic) are still a question mark. If I had the whole running car (rather than just the MAF), I'd figure it all out in 30 minutes. Anyone care to comment or provide some insight? Thanks, Brad Anesi '88 XR4Ti 5-speed ...and some other assorted German & Italian hardware ...but no Swedes ___________________________________________________________________ Get the Internet just the way you want it. Free software, free e-mail, and free Internet access for a month! Try Juno Web: http://dl.www.juno.com/dynoget/tagj. - ------------------------------ Date: Tue, 13 Jul 1999 15:31:07 +1000 From: "Lowther, Peter" Subject: ecu design What are the procedures for registering onto the diy_efi list? I'm interested in locating a circuit design for building a DIY ecu. Peter Lowther - ------------------------------ End of DIY_EFI Digest V4 #411 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi". ------------------------------ Date: Wed, 21 Jul 1999 10:06:40 -0700 From: "Stowe, Ted-SEA" Subject: RE: 1227730 ecu or 16198262 ecu needed, 687 ecu for sale/trade Hi. someone was nice enough to send me an email about getting a 730 from a local yard, however I accidentally deleted the email, or moved it to some folder for safe keeping, in either case, if that person would email me back I'd appreciate it. sorry for the duplicate message. thanks, Ted Stowe - -----Original Message----- From: Stowe, Ted-SEA Sent: Monday, July 19, 1999 11:26 PM To: 'diy_efi@xxx.edu' Subject: 1227730 ecu or 16198262 ecu needed, 687 ecu for sale/trade have 1226867 & gm throttle body etc for sale/trade. would like to find ecu out of '91 camaro. please email me off line. thanks, Ted Stowe NOTICE: This communication may contain privileged or other confidential information. If you are not the intended recipient, or believe that you have received this communication in error, please do not print, copy, retransmit, disseminate, or otherwise use the information. Also, please indicate to the sender that you have received this email in error, and delete the copy you received. Thank you. ------------------------------ End of DIY_EFI Digest V4 #426 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi".