DIY_EFI Digest Friday, July 23 1999 Volume 04 : Number 429 In this issue: I have some methanol questions. Blank ECM Prom chips new to the list DSP DFI See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. ---------------------------------------------------------------------- Date: Thu, 22 Jul 1999 22:19:36 +0200 From: =?iso-8859-1?Q?J=F6rgen_Karlsson?= Subject: I have some methanol questions. First of all what is the octane rating of methanol? I have heard figures ranging from 105 octane to 126 octane! Will the corrosion be stopped If I blend 0.5% of 2stroke oil in the methanol? I am not sure that methanol and oil even mixes, if not; will 2stroke oil mix in a 15%gas,85%methanol blend? I plan to use two large (very large)injectors with methanol placed before the throttle body, as secondary injectors. The primary injectors are placed at the ports. I will use five 40 lbs injectors as primaries (yes it is a I5 engine) and I will start batch firing the methanol injectors and the primaries above 15psi. If the methanol distribution proves to be reliable I want to install five methanol injectors in a port setup that provides all the fuel above 15psi. Jörgen jurg@xxx.se ------------------------------ Date: Thu, 22 Jul 1999 21:08:43 EDT From: MRF0135@xxx.com Subject: Blank ECM Prom chips I would like to purchase blank chips for '87 Buick GN Turbo computers and others please let me know where I can get these. Thank You ------------------------------ Date: Thu, 22 Jul 1999 18:42:59 -0700 From: "Mike" Subject: new to the list I just joined the list a couple of days ago and havent seen much traffic, Is this normal or am i not recieving the email? thanks mike ------------------------------ Date: Fri, 23 Jul 1999 00:03:12 -0400 (EDT) From: "Clive Apps Techno-Logicals 416 510 0020" Subject: DSP DFI has anyone investigated using a programmable DSP as a FI computer was at a demo today of a link card that can host 48x 920k I/O channels on a single board it uses a single DSP chip something like this could make a very interesting DSP setup Clive ------------------------------ End of DIY_EFI Digest V4 #429 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi".