DIY_EFI Digest Monday, August 2 1999 Volume 04 : Number 446 In this issue: RE: DIY_EFI Digest V4 #438 Re: DIY_EFI Digest V4 #444 See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. ---------------------------------------------------------------------- Date: Sun, 1 Aug 1999 17:30:31 -0700 From: "Al Lipper" Subject: RE: DIY_EFI Digest V4 #438 All of the files are in PDF format except for the PC board layout are on the web site (members.aol.com/ALIPPER/). The PCB is in gerber format. There are a variety of gerber viewers out there in the public domain which should work. I hope this helps. Al - -----Original Message----- From: Janne [mailto:janne@xxx.se] Sent: Thursday, July 29, 1999 4:51 AM To: efi@xxx.org Subject: Re: DIY_EFI Digest V4 #438 Hi I havenīt seen the printout (i donīt have any schematic program ) could you perhaps send an pdf or an postscript file over the layout, Ican maybe have it done quite cheap.. thou i have to have something to show.. Regards Janne http://www.navigate.se/~janne > Re: DIY_EFI Digest V4 #436 > Re: ecu7 boards > Date: Thu, 29 Jul 1999 15:37:09 -0700 > From: Al Lipper > Subject: Re: ecu7 boards > > I've been away for several weeks, and have been trying to get a cheaper > price on the boards (it's now over $100 each). I'll get back to my search > this week I expect. I do have some ECU6 boards left if you want one. They > cost $37US plus shipping. Just let me know if you's like one and I'd be > happy to get it out to you. > > Al > ------------------------------ Date: Mon, 2 Aug 1999 08:34:43 +0800 From: dzorde@xxx.com Subject: Re: DIY_EFI Digest V4 #444 Thanks, will be checking with my local speed shop later today if this is anything they can get hold of. Also need to check with the local wreckers for a efi pump, then I should be ready to continue work. Dan dzorde@xxx.com Date: Sat, 31 Jul 1999 17:43:36 -0400 From: "C. Brooks" Subject: wide range pressure regulators I don't remember who was looking for a regulator for the turbo carb application but I looked through my parts catalogs and found a pressure regulator with adjustability over a wide range. It's made by Russell, p/n 4532. It's a 2 port regulator adjustable between 3psi and 25psi. Hope that helps, Charles Brooks ------------------------------ End of DIY_EFI Digest V4 #446 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi".