DIY_EFI Digest Monday, August 16 1999 Volume 04 : Number 472 In this issue: Car dieing update/torque convertor problems Re: DIY_EFI Digest V4 #467 See the end of the digest for information on subscribing to the DIY_EFI or DIY_EFI-Digest mailing lists. ---------------------------------------------------------------------- Date: Mon, 16 Aug 1999 09:40:15 -0500 (CDT) From: Roger Heflin Subject: Car dieing update/torque convertor problems Here is the update. The Soleinod did not fix things. The tranny fluid was burnt, there was not clutch stuff in the fluid, the probem is still either the clutch is acting weird or the stall speed has changed on the convertor, I have having the convertor removed and sent to the place that made it to have it checked and fixed. I am not sure if I burnt the fluid racing or in the traffic jam going home (it was about 100, and the car was moving at less than 5 mph, and the jam lasted close to an hour). Roger ------------------------------ Date: Mon, 16 Aug 1999 08:41:06 PDT From: "David Sagers" Subject: Re: DIY_EFI Digest V4 #467 This is a tough call cause I don't really like to interfere with buyers and sellers negoiating, but I have some experience buying a used TEC II system. Be aware that the software license is not transferrable. It is licensed to the original buyer. If someone else wants to use it legally they have to buy a license from Electromotive. The software portion of your $2000 package is $495. Now maybe you don't care about the license, OK, but what are you going to do when you need tech help from Electromotive? If you don't have a valid license they won't help you. I can't blame them, if I were intheir shoes I'd do the same thing. Does the $1400 price include the injetors? >Date: Fri, 13 Aug 1999 12:30:55 -0700 >From: Jason_Leone@xxx.com >Subject: FS: TEC II for six cyl > >Gents, > >I'm selling my Electromotive TEC II for a six cylinder, so it's a free for >all. >I only used it for a couple months, and I'll sell it WITH the software. >Retail >price is $2000 with software, but I'll sell it for $1400 or so. Comes with >all >the hardware (2 Bar MAP sensor, RS-232 cable, crank wheel, mag pickup, >manual, >ECU, coils, PAF Blend software). I'm selling it because my power output >goals >have changed (400hp--->300hp), but will miss the TEC II's power and tuning >parameters. This is a steal, and it won't last long... > >Sorry for the WOB, but I'm not aware of a DIY_EFI classified section... > >Jason >srgnt03@xxx.net >http://www.electromotive-inc.com _______________________________________________________________ Get Free Email and Do More On The Web. Visit http://www.msn.com ------------------------------ End of DIY_EFI Digest V4 #472 ***************************** To subscribe to DIY_EFI-Digest, send the command: subscribe diy_efi-digest in the body of a message to "Majordomo@xxx. A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace "diy_efi-digest" in the command above with "diy_efi".