DIY_EFI Digest        Saturday, August 28 1999        Volume 04 : Number 494



In this issue:

	Re: DIY_EFI Digest V4 #493
	Re: Throttle plates for individual throttle injection

See the end of the digest for information on subscribing to the 
DIY_EFI or DIY_EFI-Digest mailing lists.

----------------------------------------------------------------------

Date: Sat, 28 Aug 1999 07:23:26 -0700
From: neilaura@xxx.com
Subject: Re: DIY_EFI Digest V4 #493

>How about this question... Does anybody know of a source of throttle plate
>assemblies for an individual throttle injection type system? Or, almost as
>good, plans/diagrams? I have access to a CNC milling machine on an "if
>you'll fix it" basis, and I bet I could fabricate the parts myself if I
>really needed to... but I'm no machinist and the mill has a blown servo
>card ($1500 to replace, or probably $1.50 to fix if I took the time to
>figure out what was wrong), so I would rather not go that route.
>
>- -Jon
>
It may be of no help Jon. But check out late 70's early 80's Kawasaki
KZ750/1100 motorcycles. They came with the option of fuel injection. The
system never worked right, and when something went wrong with the
electronics, with a replacement cost of one arm, one leg and your first
born, the FI was pulled off and replaced with a set of carbs.
The KZ1100 was an inline 4 motor with 4 individual injector/butterfly
bodies. It may be a starting point for ideas.

Neil

------------------------------

Date: Sat, 28 Aug 1999 11:10:51 -0400
From: "crash70" <crash70@xxx.net>
Subject: Re: Throttle plates for individual throttle injection

>How about this question... Does anybody know of a source of throttle plate
>assemblies for an individual throttle injection type system? 

Here's a couple of links to check out:

TWM Induction at www.twminduction.com

and Electromotive at www.electromotive-inc.com


Good Luck!!

Chris Bishop

------------------------------

End of DIY_EFI Digest V4 #494
*****************************

To subscribe to DIY_EFI-Digest, send the command:

    subscribe diy_efi-digest

in the body of a message to "Majordomo@xxx.  

A non-digest (direct mail) version of this list is also available; to
subscribe to that instead, replace "diy_efi-digest" in the command
 above with "diy_efi".