DIY_EFI Digest        Sunday, September 5 1999        Volume 04 : Number 507



In this issue:

	Re: Throttle plates for individual throttle injection
	ALDL data stream for 1994 5.7 TBI

See the end of the digest for information on subscribing to the 
DIY_EFI or DIY_EFI-Digest mailing lists.

----------------------------------------------------------------------

Date: Sat, 4 Sep 1999 21:08:51 +0100
From: "Rich Mauruschat" <rsrich@xxx.net>
Subject: Re: Throttle plates for individual throttle injection

- -----Original Message-----
From: DIY_EFI Digest <DIY_EFI-Digest-Owner@xxx.edu>
To: DIY_EFI-Digest@xxx.edu
<DIY_EFI-Digest@xxx.edu>
Date: 31 August 1999 11:20
Subject: DIY_EFI Digest V4 #497


OK Jon, I take your point - you don't want to be messing with carbs at that
sort of price!!
Here in the UK you can get a pair of rough carbs for next to nothing, 40mm
usually though.
Rich


>Date: Mon, 30 Aug 1999 17:49:21 -0700 (PDT)
>From: "Jon V." <jon@xxx.com>
>Subject: Re: Throttle plates for individual throttle injection
>
>If I could find a "cheap" set of Del'orto carbs and manifold, the last
>thing I would do is hack into them! Where I come from, a USED set of
>45MM  Del'ortos (the size recommended for this engine) with the right
>manifold for my engine cost over $900 US, Used and NOT rebuilt... Now,
>I'll admit that I didn't do MUCH looking, but I've got one company that
>would LOVE to sell me a pair of 45MM Del'ortos with manifold... for $1400
>US!
>
>So, either I want your bank account or I want your source for carbs...
>'cause AFAIK I could buy a whole damn car for the price of a set of those
>"cheap" carbs that you are talkin' about.
>- -Jon

------------------------------

Date: Sat, 4 Sep 1999 23:46:18 EDT
From: PHXSYS@xxx.com
Subject: ALDL data stream for 1994 5.7 TBI

Hi

Does anyone know what ALDL data stream is for Chev p/u 1994 5.7 TBI?

 Some of the members of this list have been very helpful providing info for 
the 5.7 TPI (vin P). They suggested appeal to the list for this application.

I'd settle for a point in the right direction or some pointer on how I may be 
able to start with the TPI (vin P) data and decode the 5.7 TBI (K).

Thanks in advance


Jon

------------------------------

End of DIY_EFI Digest V4 #507
*****************************

To subscribe to DIY_EFI-Digest, send the command:

    subscribe diy_efi-digest

in the body of a message to "Majordomo@xxx.  

A non-digest (direct mail) version of this list is also available; to
subscribe to that instead, replace "diy_efi-digest" in the command
 above with "diy_efi".