DIY_EFI Digest      Thursday, September 30 1999      Volume 04 : Number 553



In this issue:

	Re: DIY_EFI Digest V4 #551
	o2 ecm current draw
	Bosch Motronic

See the end of the digest for information on subscribing to the 
DIY_EFI or DIY_EFI-Digest mailing lists.

----------------------------------------------------------------------

Date: Thu, 30 Sep 1999 11:16:35 +0500
From: Sergey Utlyakov <sergu@xxx.ru>
Subject: Re: DIY_EFI Digest V4 #551

You wrote:

DD> Date: Tue, 28 Sep 1999 16:39:54 +0100
DD> From: "Alan Smith" <alansmith@xxx.com>
DD> Subject: 8051 C compiler wanted

DD> Does anybody know where I can get a C complier for the 8051 ?

DD> Alan Smith

http://www.geocities.com/ResearchTriangle/Forum/1353/
SDCC is a Freeware , retargettable, optimizing ANSI - C compiler for
Intel 8051 based MCUs


Best Regards,
Sergey Utlyakov
mailto:sergu@xxx.ru

------------------------------

Date: Thu, 30 Sep 1999 01:34:36 EDT
From: PHXSYS@xxx.com
Subject: o2 ecm current draw

Hi

I want to send false O2 voltages to the ecm. The DAC I was looking at using 
can source or sink 5 mA. Is that enough current to drive the ecm a/d.

Thanks

Jon

------------------------------

Date: Thu, 30 Sep 1999 08:25:58 +0200
From: Putter C <cputter@xxx.za>
Subject: Bosch Motronic

I have a problem with my opel(vauxhaul) Astra 200i (Not the EURO series).
Maybe anybody on the list have seen the following syntoms:
When I drive for quit a while (1-2hours) and go to stop at a trafic light
then the masjine tends to stall, I have changed air fileters, feul filters
and sparc-plugs(the usual), but the probleem seems to be a little deeper.
Any help would be appreciated.
#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
			Carlo Putter
Development Engineer SED	Ontwerps ingenieur SED
University of Stellenbosch	Universiteit van Stellenbosch
South Africa	Suid Afrika
- -------------------------------------------------------------
		e-mail : cputter@xxx.za
		   web : www.sed.sun.ac.za
		          Tel : 8084033
		         Fax : 808 4981
- -------------------------------------------------------------

------------------------------

End of DIY_EFI Digest V4 #553
*****************************

To subscribe to DIY_EFI-Digest, send the command:

    subscribe diy_efi-digest

in the body of a message to "Majordomo@xxx.  

A non-digest (direct mail) version of this list is also available; to
subscribe to that instead, replace "diy_efi-digest" in the command
 above with "diy_efi".