Apple2.org - Refurbishing Your 3.5" Drive Assembly
The contents of this website are (C) 1996-98 Tony Diaz.
       
        Refurbishing your 3.5" Apple Drive Assembly
      These pages cover disassembling and re-assembling your drive. While this 
      procedure is not difficult, it is NOT FOR EVERYONE. If you feel any of 
      this is above you then by all means seek assistance. Print out these pages 
      and have someone do it with you. This information is provided AS-IS and I 
      AM NOT RESPONSIBLE for ANY ACTIONS caused by the USE OR MISUSE of this 
      information. You have been Warned. 
      *** Please READ ALL these PAGES before embarking on this project! *** 
      As shown during KansasFest '98, the following pages will show you how to 
      disassemble your drive. For reassembly, follow the pages backward if 
      needed, or make notes.

      "The Power ][ Be Your Best!"
      UniDisk 3.5" (Liron) Analog Card
      This board has the connectors for both drives, as it is from the drive 
      pictured above. The production version of this did not include the second 
      set of connectors however if you added them and built your own drive case, 
      the board would support two drives without any more modifications.
      Let's Begin!