From: Gary Kratochvil <et@fishhead.com>
Subject: Re: Apple //e to PC Null modem cable pinout
Date: Monday, June 21, 1999 10:25 PM

phoenyx wrote:

> > > SSC side      Modem side
> > > 25-pin Dsub   25-pin Male Dsub
> > >
> > >    2 -------> 2
> > >    3 <------- 3
> > >    4 -------> 4
> > >    5 & 8 <--- 5
> > >    6 <------- 8
> > >    7 <------> 7
> > >    20 ------> 20

> Basically you are fooling the handshaking routines built into the compters. Most simple
> programs
> don't even use the handshake. For instance, ADT.
> 
> On the cable from Rubywand. Yes, you are shorting those wires,  It is easiest to hook 5
> to 8
> then 8 to 5 on the other connector.  This cable does not fool the hardware handshake
> routines
> and is better for PC to Apple terminal programs and transfer protocals such as Zmodem.

I see shorting 5 & 8 and connecting to 5 on the PC side but I don't see
shorting 8 & 5 on the PC side. Is that your suggestion? Doesn't also
then short 6 on the SSC side? Since I need to get down to 9 pins to get
into my PC is there any difference in the two cables if I still need to
use a 25 to 9 pin adaptor?

> >  RTS (7) --\                /-- RTS (4)
> >  CTS (8) --/                \-- CTS (5)
> >
> >  CD  (1) --\                /-- DSR (6)
> >  DSR (6) --+                +-- DTR (20)
> >  DTR (4) --/                \-- CD  (8)

If I understand this correctly I can connect directly from SSC 6 to PC
20. Then on the 
SSC side solder a jumper wire from 1 and 4 to 6 and on the PC side
solder a jumper wire from 6 and 8 to 20?

Thanks for your time!
Gary
 