These disk images were created with ImageDisk.
ImageDisk is available from www.dunfield.com :
 - Go to my "old computer" website link near the bottom
 - Go to "disks/software images" (near the bottom)

These disks are for: Compupro

To view the details of a disk image, please use the IMDU
utility provided with ImageDisk. You can also simply TYPE
the file to view the image comment.

Dave Dunfield
www.dunfield.com


These are two 8" SSDD disks, which between the two contain all
the system files. One has the boot loader for the 8086/8087 CPU;
the other will boot the 8085/8088. ALL the files on oth disks are
needed for either system and should eventually be all put on one
double-sided disk or a hard drive.

The CPM.SYS file supplied will boot up supporting four 8" floppy
drives (you can use any number up to 4 and it will be fine), and
it will support the Interfacer-4 or the System Support boards.

Switch settings:

8086/8087 CPU:
--------------
S1 - All OFF
S2 - All OFF
S3 - 1,5,6,8=OFF  2,3,4,7=ON
S4 - 1,2=OFF  3-10=ON

8085/8088 CPU:
--------------
S1 - 4,5,8=OFF  1,2,3,6,7=ON
S2 - All OFF
S3 - 1,3,4,5,6,7,8=OFF  2=ON

DISK1A:
-------
S1 - 1,6,8=OFF  2,4,5,7=ON  3=OFF for 8086, ON for 8085
S2 - 1-7=OFF  8=ON
S3 - 6,7=OFF  2,3,4,5,8=ON  1=OFF for Interfacer-4, ON for System Support
J1 - All jumpers in 8" (top) position
J7 - "B,C" position
J10 - "4" position

Interfacer-4:
-------------
S1 - All OFF
S2 - 3,4,8=OFF  1,2,5,6,7,9,10=ON
S3 - 5,6,7,8=OFF  1,2,3,4=ON

System Support:
---------------
S1 - 1,5,6,8=OFF  2,3,4,7=ON
S2 - 5,6,7,8=OFF  1,2,3,4=ON
S3 - 1,2,3,4,6,8=OFF  5,7=ON

