Common FR SmplFR

more...

DESCRIPTION

To install the Software Sample Files please download the compressed self-extracting file. The Standard Installation Target Directory is: C:\Softune\sample\smplfr

FEATURES

Debug Project This is a dummy project to start directly the Softune Workbench debugger, without using the project managment IDE. The debug file name.abs to debug must be located in the \ABS folder. Edit the path in the [member] entry in the debug.prj file to ensure that the correct .abs file is loaded into the emulator system. Procedure Files: Procedure Files are for speeding up the memory fill process, the code is loaded into the specified memory and execution is started till end of code. CANMSG This macro outputs the message buffer configuratiopn of a dedicated CAN controller. CANSTAT This macro outputs the status of a dedicated CAN controller. fastCS1 The file sets the PLL-Clock to 32MHz for faster download and enables ONLY CS1 for the ROM-area 18:0000...1F:FFFF. Setting the CS1-Jumper to SRAM on the emulation board allows to emulate ROM-areas the same way as in the Flash-Chip. reset Resets the MCU. setclk Resets the MCU and set some values to some memory areas. History of CommonFR: Date Revision Description 13.06.01 V01R02 Example Package released 10.04.01 V01R01 Example Package released

DOWNLOAD

Note: Netscape Navigator 4.xx does not allow direct execution of ".exe" files. Saving them to a temporary folder and executing them there is recommended.

Self-extracting Sample Files for CommonFR V01R02 164 KB, 18. June 2001 Click here to look for more recent documents!