F²MC-16L/LX
Back...

Sub-directoryVersionDescription
Master/SlaveV1.1This application note describes how several microcontroller units communicate together in a master and slave system via Uart. It describes an example implementation for the MB90540 series and gives general hints, which Uart macros can be used for master/slave communication.
SPIV1.1This application note describes how a SPI device can be connected to the Fujitsu Microcontroller MB90540 series. Two different possibilities exist to communicate with the SPI device. One is the SIO, the other is the Uart in synchronous mode.
BusInterfaceV1.3This Application Note describes how to connect external devices to the external bus interface of the 16LX microcontroller Family
DevKit16StartupV1.1Getting started of the DevKit16 starterkit. Basic introduction.
RESET16LV1.1Notes on HST or RST reset inputs for 16L Family
EIIOS_SIOV1.0Using the Extended Intelligent IO Service for the SIO Interface
CanV1.0Description of the CAN interface
FlashProgrammingV1.4Explaining the different possibilities to program the Flash Microcontrollers
BI-ROMV2.2Using the Flash361 flash programming software to download any application to the RAM for the 16LX Family
TimeMeasurementsV1.1Time measurement possibilities using the emulator system Softune Worknebch V03
StartWorkbenchV1.1Softune Workbench Getting started, Basic settings
InstallV03V1.0Install Softune Workbench V03
NewProjectV1.0Start a new project using Softune Workbench
LAN InstallV1.1Installation of LAN Adapter of the 16Bit emulator system
ExternalFlashV1.1How to connect external Flash memory to a ROMless microcontroller
DisplayV1.1How to connect a LCD display to a general I/O port
BaudgenV1.1How to use an internal timer for Baud rate generation of the UART
EmulatorSetup506V1.0Emulator system installation for MB2145-506 emulation pod
EmulatorSetup507V2.0Emulator system installation for MB2145-507 emulation pod
ProbecablesV1.0Which Probecables fits for which evaluation board
SimulatorV1.0Some hints to simulate Interrupts and I/O ports with the simulator
StartupV1.0Basic introductions for the startup file and programming hints
Baud Rate CalculationV1.1An Excel sheet to calculate the UART Baudrates
Waveform GeneratorV1.1How to init Waveform Generator of MB90560 series
DCF77V1.1DCF77 receiver implementation for MB90670/675 series
EIIOS/StackV2.0This note describes the special stack operation of MB90500 core, if the Extended Intelligent I/O Service is used. This is mainly relevant for operating systems and schedulers.
Change MCU540V1.0Application note which describes how to modify the Devkit16-MCU540 CPU module in order to be used with MB90580, MB90550 Series