54AC16472, 74AC16472
18-BIT REGISTERED TRANSCIEVERS
WITH 3-STATE OUTPUTS

SCAS165A - JUNE 1990 - REVISED APRIL 1996

features

• Members of the Texas Instruments Widebus ^TM Family
• 3-State True Outputs
• Flow-Through Architecture Optimizes PCB Layout
• Distributed V_CC and GND Pin Configuration Minimizes High-Speed Switching Noise
• EPIC ^TM (Enhanced-Performance Implanted CMOS) 1-m Process
• 500-mA Typical Latch-Up Immunity at 125°C
• Package Options Include Plastic 300-mil Shrink Small-Outline (DL) Package Using 25-mil Center-to-Center Pin Spacings and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center Pin Spacings

  EPIC and Widebus are trademarks of Texas Instruments Incorporated.

   

description

The 'AC16472 are 18-bit registered transceivers that contain two sets of D-type latches for temporary storage of data flowing in either direction. They can be used as two 9-bit transceivers or one 18-bit transceiver. Separate latch-enable ( or ) and output-enable ( or ) inputs are provided for each register to permit independent control in either direction of data flow.

When and are both low, the A-to-B latches are transparent; a subsequent low-to-high transition of puts the A latches in the storage mode. With low, the B outputs are active and reflect the data present at the output of the A latches. Data flow from B to A is similar, but requires the use of the and inputs.

The 74AC16472 is packaged in TI's shrink small-outline package (DL), which provides twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area.

The 54AC16472 is characterized for operation over the full military temperature range of -55°C to 125°C. The 74AC16472 is characterized for operation from -40°C to 85°C.