SN74LVC16541
16-BIT BUFFER/DRIVER
WITH 3-STATE OUTPUTS

SCAS350A - MARCH 1994 - REVISED JULY 1995

features

• Member of the Texas Instruments Widebus^TM Family
• EPIC ^TM (Enhanced-Performance Implanted CMOS) Submicron Process
• Typical V_OLP (Output Ground Bounce) < 0.8 V at V_CC = 3.3 V, T_A = 25°C
• Typical V_OHV (Output V_OH Undershoot) > 2 V at V_CC = 3.3 V, T_A = 25°C
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
• Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V V_CC)
• Package Options Include Plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) Packages

  EPIC and Widebus are trademarks of Texas Instruments Incorporated.

   

description

This 16-bit buffer/driver is designed for 2.7-V to 3.6-V V_CC operation; it can interface to a 5-V system environment.

The SN74LVC16541 is a noninverting 16-bit buffer composed of two 8-bit sections with separate output-enable signals. For either 8-bit buffer section, the two output-enable (1 and 1 or 2and 2) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 8-bit buffer section are in the high-impedance state.

To ensure the high-impedance state during power up or power down, should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74LVC16541 is characterized for operation from -40°C to 85°C.