54AC16824, 54ACT16824
74AC16824, 74ACT16824
18-BIT D-TYPE FLIP FLOPS WITH 3-STATE OUTPUTS
SCAS403 - JUNE 1990
The 'AC16824 and 'ACT16824 are inverting 18-bit D-type flip-flops
composed of two 9-bit sections with separate control signals. For
either 9-bit flip-flop section, if the clock enable (1
or 2
) is low, the inverse of the data
present at the corresponding D inputs is stored in the flip-flops on
the rising edge of 1CLK (or 2CLK). When 1
(or 2
) is high, the flip-flops retain
their previously stored values. Taking 1
(or 2
) ) low asynchronously clears the
corresponding flip-flops.
When the output enable (1
or
2
) is low, the
corresponding Q outputs are active (high or low logic levels). When
1
(or 2
) is high, the corresponding
outputs are in the high-impedance state. 1
(or 2
) does not affect the internal
operation of the flip-flops: previously stored data can be retained
or new data can be entered while the outputs are in the
high-impedance state.
The 74AC16824 and 74ACT16824 are packaged in TI's shrink small-outline package (SSOP) with 25-mil center-to-center pin spacings. This package provides twice the I/O pin count and functionality of a standard small-outline package in the same printed-circuit-board area.
The 'AC16824 has CMOS-compatible input thresholds. The 'ACT16824 has TTL-compatible input thresholds.
The 54AC16824 and 54ACT16824 are characterized over the full military temperature range of -55°C to 125°C. The 74AC16824 and 74ACT16824 are characterized for operation from -40°C to 85°C.