SN54ACT563, SN74ACT563
OCTAL D-TYPE TRANSPARENT LATCHES
WITH 3-STATE OUTPUTS

SCAS550A - NOVEMBER 1995 - REVISED 1996

features

• Inputs Are TTL-Voltage Compatible
• 3-State Inverted Outputs Drive Bus Lines Directly
• Flow-Through Architecture to Optimize PCB Layout
• EPIC^TM (Enhanced-Performance Implanted CMOS) 1-m Process
• Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), Ceramic Chip Carriers (FK) and Flatpacks (W), and Standard Plastic (N) and Ceramic (J) DIPs

   

  EPIC is a trademark of Texas Instruments Incorporated.

description

The 'ACT563 are octal D-type transparent latches with 3-state outputs. When the latch-enable (LE) input is high, the Q\ outputs are set to the complements of the data (D) inputs. When LE is taken low, the Q\ outputs are latched at the inverse logic levels set up at the D inputs.

A buffered output-enable () input places the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased high logic level provide the capability to drive bus lines without interface or pullup components.

does not affect internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

The SN54ACT563 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ACT563 is characterized for operation from -40°C to 85°C.