SN74ALVCH162830
1-TO-2 ADDRESS DRIVER
WITH 3-STATE OUTPUTS

SCES082A - AUGUST 1996 - REVISED DECEMBER 1996

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

features

• Member of the Texas Instruments Widebus^TM Family
• EPIC^TM (Enhanced-Performance Implanted CMOS) Submicron Process
• Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
• Packaged in Plastic 300-mil Thin Shrink Small-Outline Package

EPIC and Widebus are trademarks of Texas Instruments Incorporated.

description

This 1-bit to 2-bit address driver is designed for 2.3-V to 3.6-V V_CC operation.

Active bus-hold circuitry is provided to hold unused or floating inputs at a valid logic level.

The outputs, which are designed to sink up to 12 mA, include 26- resistors to reduce overshoot and undershoot.

To ensure the high-impedance state during power up or power down, should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74ALVCH162830 is packaged in TI's thin shrink small-outline (DBB) package, which provides twice the I/O pin count and functionality of standard small-outline packages in the same printed circuit board area.

The SN74ALVCH162830 is characterized for operation from -40°C to 85°C.