SN54F299, SN74F299
8-BIT UNIVERSAL SHIFT/STORAGE REGISTERS
WITH 3-STATE OUTPUTS

SDFS071A - MARCH 1987 - REVISED OCTOBER 1993

features

• Four Modes of Operation:
• Hold (Store)
• Shift Right
• Shift Left
• Load Data
• Operates With Outputs Enabled or at High Impedance
• 3-State Outputs Drive Bus Lines Directly
• Can Be Cascaded for N-Bit Word Lengths
• Direct Overriding Clear
• Applications:
• Stacked or Push-Down Registers
• Buffer Storage
• Accumulator Registers
• Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs

description

These 8-bit universal shift/storage registers feature multiplexed I/O ports to achieve full 8-bit data handling in a single 20-pin package. Two function-select (S0, S1) inputs and two output-enable (, ) inputs can be used to choose the modes of operation listed in the function table.

Synchronous parallel loading is accomplished by taking both S0 and S1 high. This places the 3-state outputs in a high-impedance state and permits data that is applied on the I/O ports to be clocked into the register. Reading out of the register can be accomplished while the outputs are enabled in any mode. Clearing occurs when the clear () input is low. Taking either , or high disables the outputs but has no effect on clearing, shifting, or storage of data.

The SN54F299 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74F299 is characterized for operation from 0°C to 70°C.

NOTE: a...h = the level of the steady-state input at inputs A through H, respectively. This data is loaded into the flip-flops while the flip-flop outputs are isolated from the I/O terminals.

When one or both output-enable inputs are high the eight I/O terminals are disabled to the high-impedance state; however, sequential operation or clearing of the register is not affected.