Digital Signal Processing Solutions Tools: Development Boards

Product Name: SPIRIT-30 VME
Company Name: RadiSys Corp., DSP Division
Features & Benefits:
  • 33 MFLOPS peak performance
  • A32/D32, 16 VME bus interface
  • SPIRIT-30 and VME interrupt support
  • Memory expansion to 4 MBytes zero-wait-state SRAM
  • Wide range of drivers available
Platforms Supported: VME
Host Platforms Supported: Windows 3.1 Windows 95 Windows NT
TMS320 Devices Supported: C30
CPU: 1
Clock Speeds Available (MHz): 33
Board Size: 7.5 10.25 1
Memory (DRAM/SRAM): SRAM
Expansion Options:
Software Included:
Technical Support/Training Available: YES
Overview: The SPIRIT-30 VME provides a TMS320C30 DSP engine for high performance VME applications. Its memory is expandable from a base configuration of 256 kBytes up to 4 MBytes of zero-wait-state SRAM, and up to 16 MBytes of DRAM. The SPIRIT-30 VME has three interfaces on the front panel: a high-speed parallel port (33 MBytes/sec), and two serial interfaces (6.4-8 Mbits/sec each). The VME host has full 32-bit (A32/D32) and A32/D16 access to the SPIRIT-30 SRAM and DRAM memory. The control space is accessed as an A16/D16 slave. The local SRAM is also directly accessible from the VME bus for D32 and D16 transfers. The host has the capability to reset, interrupt, enable/disable, and read SPIRIT-30 status via a control register. Similarly, the SPIRIT-30 can interrupt the host via any of the VME bus interrupts. A variety of development tools and environments are available for rapid development on the SPIRIT-30 VME.
Company Information: RadiSys Corp., DSP Division
2 Wells Avenue
Newton MA 02159-3208 USA
Tel: 800 628 6502
Fax: 617 235 2531
e-mail: info@radisys.com
www: http://www.radisys.com
RadiSys designs and manufactures a wide range of standard and custom embedded and stand-alone products, including TI DSP-based data and signal processing solutions.

© Copyright 1998 Texas Instruments Incorporated. All rights reserved.
Trademarks, Important Notice!