NEW PRODUCT RELEASE FORM FOR MSP50C33

SECTION 1.  OPTION SELECTION
     This section is to be completed by the customer and sent to TI along with
     the microprocessor code and speech data.

Company:_____________________________   Division:_____________________________
Project Name:________________________   Purchase Order #:_____________________
Management Contact: _______________________________  Phone:(___) _____________
Technical Contact : _______________________________  Phone:(___) _____________
Customer Part Number:_____________________________


D/A Output (check one):

           ___ 2 pin push-pull (2D)

           ___ Single pin double ended (1A)

Oscillator (check one):

           ___ Internal (Two ranges selected by software:
                         1) 15.36MHz (14.89MHz - 15.82MHz)
                         2) 19.2MHz (18.62MHz - 19.77MHz))

           ___ External

Frequency Trim (check one):

           ___ Low frequency only: 14.89MHz - 15.82MHz
               Note: The high frequency of 18.62MHz - 19.77MHz that is listed
                     in the manual specification will not be guaranteed.

           ___ High frequency only: 18.62MHz - 19.77MHz
               Note: The low frequency of 14.89MHz - 15.82MHz that is listed
                     in the manual specification will not be guaranteed.

           ___ Low and high frequency: Both low frequency (14.89MHz - 15.82MHz)
               and high frequency (18.62MHz - 19.77MHz) are guaranteed per the
               manual specification.

Package Type (check one):

           ___ N (plastic 16-pin DIP)

           ___ SOWB (16 pin)
                  ___ Tube
                  ___ Reel

           ___ Die

******************************************************************************

SECTION 2A. ASSIGNMENT OF TI PRODUCTION PART NUMBER
     This section is to be completed by TI.

TI Part Number:______________

SECTION 2B. ASSIGNMENT OF SYMBOLIZATION FORMAT
     The first line of the symbolization is fixed.
     The second and third lines are to be filled in by the customer.

Top Side Symbolization (16pin 'N')
                           +-----------------------+   LLL: LOT TRACE CODE
                           |     ??? YMLLLT        |   YM:  DATE CODE
                           |    <optional 13 char> |   T:   ASSY SITE
                           |    <optional 11 char> |   ???: TI EIA NO. or
                           +-----------------------+           TI LOGO

 The customer may choose between 980 or the TI LOGO on the first line.

Top Side Symbolization (16pin 'SOWB')
                           +-----------------------+   LLL: LOT TRACE CODE
                           |     \T/ YMLLLT        |   YM:  DATE CODE
                           |    <optional  9 char> |   T:   ASSY SITE
                           |    <optional  6 char> |   \T/: TI LOGO
                           +-----------------------+

******************************************************************************

SECTION 3.  AUTHORIZATION TO GENERATE MASKS, PROTOTYPES, AND RISK UNITS
     This section is to be completed by the customer and sent to TI after
     the following criteria have been met:

1) The customer has verified that the TI computer generated data matches the
   original data.

2) The customer approves of the symbolization format in Section 2B. (Applies
   to packaged devices only)

I hereby certify that the TI generated verification data has been checked and
found to be correct, and I authorize TI to generate masks, prototypes, and
risk units in accordance with purchase order in section 1 above. In addition,
in the instance that this is a packaged device, I also authorize TI to use the
symbolization format illustrated in section 2B on all devices with the part
number indicated in section 2A.

By:_________________________________________    Title:________________________

Date:_____________________

******************************************************************************

SECTION 4.  APPROVAL OF PROTOTYPES AND AUTHORIZATION TO START PRODUCTION
     This section is to be completed by the customer after prototype devices
     have been received and tested.

I hereby certify that the prototype devices have been received and tested and
found to be acceptable, and I authorize TI to start normal production in
accordance with purchase order #______________________.

By:_________________________________________    Title:________________________

Date:_____________________

******************************************************************************
Return to:   Texas Instruments, Inc.
             Attn: Code Release Team
             P.O. Box 660199, M/S 8718
             Dallas, TX 75266-0199

OR Fax to:   (972)480-7301
             Attn: Code Release Team

Have Questions?:
CALL:        Code Release Team
             (972)480-4444

OR E-MAIL:   code-rel@msp.sc.ti.com