
			  W I N L O A D  1 1
			        HELP


First, this is a very small help and you must have verygood knowledge of
the 68HC11 micro controller.

Seconde, you must have a 68HC11 in bootstrap mode connect via serial port
to your computer

Third, Winload work with 68HC11 flavor A1-A8-D3-E2-E9-F1-K4

Menu explanation: 
-----------------

File, Exit	: Exit the software

----

Comm, TestComm  : Winload11 will download a program in to the 68HC11 to
		  check the communication. If TX = RX every thing it's ok

Comm, Setup	: To setup witch communication port is use to communicate
		  with the 68HC11
----

Eeprom, Stat	: Will check the status of the eeprom into the 68HC11
		  (program, erase)

Eeprom, Erase   : Will erase ($FF) the eeprom of into the 68HC11 

Eeprom, Prog	: Will program the eeprom into the 68HC11 with your S19
		  S-Record file

----

Eprom, Stat	: Will check the status of the eprom into the 68HC11
		  (program, erase)

Eprom, Prog	: Will program the eprom into the 68HC11 with your S19
		  S-Record file

----

Config		: Will Read and give you the value of the config register
		  and let you modify it

----

DeviceID	: Will Give you the mask rom device ID of your hc11	
		  That will be important that you give me the result
		  of this if you report a bug

----

Help, About	: Will give you the version of the software

Help, Help	: That's this small help

Help, Register	: That's the registration form to have a legal copy of the
		  software



P.S.: If you use MC68HC811, you must be sure that your eeprom is between
      $F800-$FFFF if you want to check status or erase



