============================  MC68HC05J1A  ================ rev 04/13/94
 
                     MOTOROLA CSIC MCU DIVISION
                              ORDER FORM
 
------------------------------------------------------------------------
   Use this form when submitting code on diskettes.
------------------------------------------------------------------------
 
   This form is subject to change.  Check with your Motorola
   salesperson or marketer to make sure you have a current form.
 
   This form must be filled out completely before code is submitted.
   Contact your Motorola salesperson for assistance.
 
   DO NOT CHANGE THE OPTIONS LISTED ON THIS FORM.
   IF REQUIRED OPTIONS ARE NOT LISTED, INCLUDE THE INFORMATION IN THE
   COMMENTS/SPECIAL ELECTRICAL SECTION.
------------------------------------------------------------------------
 
Motorola SC Number (if pre-assigned):_____________________Date:_________
 
Customer:_______________________________________________________________
 
Street Address(No P.O. Boxes):__________________________________________
 
City:_______________________________________State:______________________
 
Zip Code:__________________Country:_____________________________________
 
Customer Contact:_______________________________________________________
 
Phone #: (_______)______________________Extension #:____________________
 
Salesperson:____________________________________________________________
 
Sales Office:___________________________Phone #: (_______)______________
 
Customer Part Number:___________________________________________________
 
 
  _____________________________  Customer part #, if part of marking, is
          (signature)            for reference only.  There is either no
                                 print, or print is tested to Motorola
or                               data sheet electrical information.
 
  _____________________________  There is a print/spec for this device
          (signature)            and ordered parts must comply to this
                                 spec as it deviates from Motorola
                                 standard. (PRINT/SPEC MUST BE SUBMITTED
                                 WITH THIS ORDER FORM.)
 
------------------------------------------------------------------------
Encryption/Decryption Algorithm included in customer software or end use
application (if encryption/decryption algorithm is included, contact
your Motorola salesperson BEFORE SUBMITTING CODE, additional information
is required):  ___ YES   ___ NO
 
MCU Function and Customer End Use Description:__________________________
 
________________________________________________________________________
 
________________________________________________________________________
MCU Function and Customer End Use Description examples:
Encryption controller for secured serial port for a personal computer.
Motor controller for automatic focus on a consumer camera.
Main controller for remote controller for entertainment systems.
Speech chip controller for voice synthesizer for a commercial automobile
cruise control.
 
End Use ECCN:___________________________________________________________
 
Military Application:  ___ YES   ___ NO
------------------------------------------------------------------------
 
PATTERN SUBMISSION:
 
The original customer diskette will be kept by Motorola for contractual
purposes.  Label the diskette with customer name, date, MCU ROM device
and SC number (if pre-assigned).
 
Use Motorola S19 EXORciser format.  NON-USER AREAS MUST BE LEFT BLANK OR
FILLED WITH ZEROES.  Motorola may request pattern resubmission if
non-user areas contain any non-zero code.
 
CHOOSE ONLY ONE:
___ 3.5" diskette Macintosh format: ___ 1.4M DS HD  ___ 800K DS DD
___ 3.5" diskette IBM format:       ___ 1.44M DS HD ___ 720K DS DD
___ 5.25" diskette IBM format:      ___ 1.2M DS HD  ___ 360K DS DD
 
Motorola will send the customer a copy of the verify listing on a
CUSTOMER SUPPLIED diskette (must be the same type of diskette as the
pattern submission diskette).  This is in addition to a hard copy
printout of the verify listing.
------------------------------------------------------------------------
 
MOTOROLA TO SHIP VERIFY LISTING TO:
___ Customer at above address (No P.O. Boxes - addresses in U.S. only)
___ Motorola sales office
 
RVUS WILL BE SENT TO THE MOTOROLA SALES OFFICE.  In the U.S., RVUs will
be shipped direct to the customer if a factory order has been set up for
shipment to the customer.
------------------------------------------------------------------------
 
Is this pattern an updated version of an existing ROM code?
___ YES   ___ NO   If yes, what is the existing SC number? _____________
 
Where will this pattern be mass produced?
___ U.S.            ___ Israel
___ Europe          ___ Japan
___ Asia Pacific    ___ Other, please specify ____________
 
Have you asked your Motorola representative if an errata sheet exists
for this device?
___ YES   ___ NO
 
------------------------------------------------------------------------
Comments/Special Electrical Provisions****/Preferred Maskset****:
               **** requires prior factory approval
 
 
________________________________________________________________________
 
________________________________________________________________________
 
________________________________________________________________________
 
________________________________________________________________________
 
------------------------------------------------------------------------
 
User ROM Areas: $0300 to $07CF
User Vectors:   $07F8 to $07FF
 
The submitted pattern (user ROM & vectors) must begin at location $0300.
 
INTERNAL OSCILLATOR INPUT:
___ resistor                    (Option RC)
___ crystal/ceramic resonator   (Option XL)
 
    IF CRYSTAL/CERAMIC RESONATOR, 2 MEG OHM INTERNAL RESISTOR:
        ___ enable              (Option RE)
        ___ disable /default/   (Option RD)
 
EXTERNAL INTERRUPT TRIGGER:
___ edge-sensitive only         (Option IA)
___ level- and edge-sensitive   (Option IB)
 
PORT A INTERRUPTS ON PA0-PA3:
___ enable    (Option IE)
___ disable   (Option ID)
 
PROGRAMABLE PULLDOWNS ON ALL I/O PINS:
___ enable  /SWPDI disable/   (Option PE)
___ disable /SWPDI enable/    (Option PD)
 
COMPUTER OPERATING PROPERLY (COP) WATCHDOG TIMER:
___ enable  **   (Option CE)
___ disable      (Option CD)
 
SWAIT - STOP CONVERSION TO WAIT:
___ stop as stop /swait disable/      (Option SS)
___ stop as halt /swait enable/  **   (Option SH)
 
** If the COP is enabled, it is recommended that the SWAIT be enabled.
 
------------------------------------------------------------------------
TEST OPTION (choose only one - STANDARD or LOW POWER or HIGH SPEED):
 
___ STANDARD TEST - MC68HC05J1A
       VOLTAGE SUPPLY:
       ___ 5V +/- 10%   (4.2 MHz maximum external oscillator frequency)
       ___ 3.3V +/- 10% (2.0 MHz maximum external oscillator frequency)
       TEMPERATURE RANGE:
       ___  25 degrees C - scribed die or die in wafer form
       ___   0 to   70 degrees C
       ___ -40 to  +85 degrees C (C)
       ___ -40 to +105 degrees C (V)
 
___ LOW POWER TEST - MC68HCL05J1A  (Option LP)
       VOLTAGE SUPPLY:
       ___ 5V +/- 10%   (4.2 MHz maximum external oscillator frequency)
       ___ 2.4V to 3.6V (2.0 MHz maximum external oscillator frequency)
       ___ 1.8V to 3.6V (1.0 MHz maximum external oscillator frequency)
       TEMPERATURE RANGE:
       ___  25 degrees C - scribed die or die in wafer form
       ___   0 to 70 degrees C
 
___ HIGH SPEED TEST - MC68HSC05J1A
       VOLTAGE SUPPLY:
       ___ 5V +/- 10%   (8.0 MHz maximum external oscillator frequency)
       ___ 3.3V +/- 10% (4.2 MHz maximum external oscillator frequency)
       TEMPERATURE RANGE:
       ___  25 degrees C - scribed die or die in wafer form
       ___   0 to  70 degrees C
       ___ -40 to +85 degrees C (C)
------------------------------------------------------------------------
 
EXTERNAL OSCILLATOR FREQUENCY:
 
_________________________
 
PRODUCTION PACKAGE TYPE:
___ 20 pin plastic DIP (P)
___ 20 pin SOIC (DW)
___ scribed die probed at 25 degrees C only (SCC)
___ die in wafer form probed at 25 degrees C only (SCW)
 
RVU SAMPLE PACKAGE TYPE (choose only one - RVUs not available in SOIC):
___ ceramic equivalent of 20 pin plastic DIP (P)
___ scribed die probed at 25 degrees C only (SCC)
___ none (no RVUs to be sent to customer/ship to production orders only)
 
MARKING ON PACKAGED PRODUCTION MCUS:
 
___ standard Motorola marking:
 
    DIP:  line 1:  Motorola Logo  Motorola SC number
          line 2:    5 character Motorola mask set
          line 3:     Motorola traceability code
 
    SOIC: line 1:           Motorola SC number
          line 2: Motorola Logo   Motorola traceability code
 
___ customer marking in addition to the standard Motorola marking:
 
    _________________________            maximum:  1 customer line *
                                             DIP: 14 characters per line
                                            SOIC: 12 characters per line
 
    * The Motorola SC number will not appear on the package if all
      additional customer lines are used.  Marking the packages with the
      Motorola SC number will facilitate the manufacturing process.
 
    The Motorola Logo and copyright symbol use 2 characters each.
 
    DIP  marking maximum: total of 3 lines, 14 characters per line.
    SOIC marking maximum: total of 2 lines, 12 characters per line.
 
============================  MC68HC05J1A  ================ rev 04/13/94