============================= MC68HC05P1A  ================ rev 06/28/94
 
                     MOTOROLA CSIC MCU DIVISION
                              ORDER FORM
 
------------------------------------------------------------------------
   Use this form when submitting code on diskettes.
------------------------------------------------------------------------
 
   This form is subject to change.  Check with your Motorola
   salesperson or marketer to make sure you have a current form.
 
   This form must be filled out completely before code is submitted.
   Contact your Motorola salesperson for assistance.
 
   DO NOT CHANGE THE OPTIONS LISTED ON THIS FORM.
   IF REQUIRED OPTIONS ARE NOT LISTED, INCLUDE THE INFORMATION IN THE
   COMMENTS/SPECIAL ELECTRICAL SECTION.
------------------------------------------------------------------------
 
Motorola SC Number (if pre-assigned):_____________________Date:_________
 
Customer:_______________________________________________________________
 
Street Address(No P.O. Boxes):__________________________________________
 
City:_______________________________________State:______________________
 
Zip Code:__________________Country:_____________________________________
 
Customer Contact:_______________________________________________________
 
Phone #: (_______)______________________Extension #:____________________
 
Salesperson:____________________________________________________________
 
Sales Office:___________________________Phone #: (_______)______________
 
Customer Part Number:___________________________________________________
 
 
  _____________________________  Customer part #, if part of marking, is
          (signature)            for reference only.  There is either no
                                 print, or print is tested to Motorola
or                               data sheet electrical information.
 
  _____________________________  There is a print/spec for this device
          (signature)            and ordered parts must comply to this
                                 spec as it deviates from Motorola
                                 standard. (PRINT/SPEC MUST BE SUBMITTED
                                 WITH THIS ORDER FORM.)
 
------------------------------------------------------------------------
Encryption/Decryption Algorithm included in customer software or end use
application (if encryption/decryption algorithm is included, contact
your Motorola salesperson BEFORE SUBMITTING CODE, additional information
is required):  ___ YES   ___ NO
 
MCU Function and Customer End Use Description:__________________________
 
________________________________________________________________________
 
________________________________________________________________________
MCU Function and Customer End Use Description examples:
Encryption controller for secured serial port for a personal computer.
Motor controller for automatic focus on a consumer camera.
Main controller for remote controller for entertainment systems.
Speech chip controller for voice synthesizer for a commercial automobile
cruise control.
 
End Use ECCN:___________________________________________________________
 
Military Application:  ___ YES   ___ NO
------------------------------------------------------------------------
 
PATTERN SUBMISSION:
 
The original customer diskette will be kept by Motorola for contractual
purposes.  Label the diskette with customer name, date, MCU ROM device
and SC number (if pre-assigned).
 
Use Motorola S19 EXORciser format.  NON-USER AREAS MUST BE LEFT BLANK OR
FILLED WITH ZEROES.  Motorola may request pattern resubmission if
non-user areas contain any non-zero code.
 
CHOOSE ONLY ONE:
___ 3.5" diskette Macintosh format: ___ 1.4M DS HD  ___ 800K DS DD
___ 3.5" diskette IBM format:       ___ 1.44M DS HD ___ 720K DS DD
___ 5.25" diskette IBM format:      ___ 1.2M DS HD  ___ 360K DS DD
 
Motorola will send the customer a copy of the verify listing on a
CUSTOMER SUPPLIED diskette (must be the same type of diskette as the
pattern submission diskette).  This is in addition to a hard copy
printout of the verify listing.
------------------------------------------------------------------------
 
MOTOROLA TO SHIP VERIFY LISTING TO:
___ Customer at above address (No P.O. Boxes - addresses in U.S. only)
___ Motorola sales office
 
RVUS WILL BE SENT TO THE MOTOROLA SALES OFFICE.  In the U.S., RVUs will
be shipped direct to the customer if a factory order has been set up for
shipment to the customer.
------------------------------------------------------------------------
 
Is this pattern an updated version of an existing ROM code?
___ YES   ___ NO   If yes, what is the existing SC number? _____________
 
Production parts for this ROM code will be ordered from:
___ Motorola Asia/Pacific
___ Motorola Europe
___ Motorola Israel
___ Motorola Japan
___ Motorola U.S.
___ Other Motorola location, please specify (                          )
 
Have you asked your Motorola representative if an errata sheet exists
for this device?
___ YES   ___ NO
 
------------------------------------------------------------------------
Comments/Special Electrical Provisions****/Preferred Maskset****:
               **** requires prior factory approval
 
 
________________________________________________________________________
 
________________________________________________________________________
 
________________________________________________________________________
 
________________________________________________________________________
 
------------------------------------------------------------------------
 
User ROM Areas: $0020 to $004F, $0100 to $08FF, $1F00 to $1FCF,
User ROM Areas: $1FF0 to $1FF7
User Vectors:   $1FF8 to $1FFF
 
INTERNAL OSCILLATOR INPUT:
___ resistor                   (Option RC)
___ crystal/ceramic resonator  (Option XL)
 
EXTERNAL INTERRUPT TRIGGER:
___ edge-sensitive only        (Option IA)
___ level- and edge-sensitive  (Option IB)
 
COMPUTER OPERATING PROPERLY (COP) WATCHDOG TIMER:
___ enable **  (Option CE)
___ disable    (Option CD)
 
** If the COP is enabled, it is recommended that the SWAIT be enabled.
 
SWAIT - STOP CONVERSION TO WAIT:
___ stop as stop - swait disable  (Option SS)
___ stop as halt - swait enable   (Option SH)
 
PORT A BIT 0:
___ no pullup/no interrupt  (Option A0)
___ pullup/interrupt        (Option Z0)
 
PORT A BIT 1:
___ no pullup/no interrupt  (Option A1)
___ pullup/interrupt        (Option Z1)
 
PORT A BIT 2:
___ no pullup/no interrupt  (Option A2)
___ pullup/interrupt        (Option Z2)
 
PORT A BIT 3:
___ no pullup/no interrupt  (Option A3)
___ pullup/interrupt        (Option Z3)
 
PORT A BIT 4:
___ no pullup/no interrupt  (Option A4)
___ pullup/interrupt        (Option Z4)
 
PORT A BIT 5:
___ no pullup/no interrupt  (Option A5)
___ pullup/interrupt        (Option Z5)
 
PORT A BIT 6:
___ no pullup/no interrupt  (Option A6)
___ pullup/interrupt        (Option Z6)
 
PORT A BIT 7:
___ no pullup/no interrupt  (Option A7)
___ pullup/interrupt        (Option Z7)
 
------------------------------------------------------------------------
BOND OUT & TEST OPTIONS:
 
___ STANDARD BOND OUT & TEST FLOW
 
    ___ STANDARD TEST - MC68HC05P1A
        VOLTAGE SUPPLY:
        ___ 5V +/- 10%   (4.2 MHz max. external oscillator frequency)
        ___ 3.3V +/- 10% (2.0 MHz max. external oscillator frequency)
        TEMPERATURE RANGE:
        ___  25 degrees C - scribed die or die in wafer form
        ___   0 to   70 degrees C
        ___ -40 to  +85 degrees C /C/  (Option ET)
        ___ -40 to +105 degrees C /V/  (Option ET)
 
    ___ LOW VOLTAGE TEST - MC68HCL05P1A  (Option LP)
        VOLTAGE SUPPLY:
        ___ 5V +/- 10%   (4.2 MHz max. external oscillator frequency)
        ___ 1.8V to 3.6V (1.0 MHz max. external oscillator frequency)
        TEMPERATURE RANGE: 0 to 70 degrees C
 
    ___ HIGH SPEED TEST - MC68HSC05P1A  (Option HS)
        VOLTAGE SUPPLY:
        ___ 5V +/- 10%   (8.0 MHz max. external oscillator frequency)
        ___ 3.3V +/- 10% (4.2 MHz max. external oscillator frequency)
        TEMPERATURE RANGE:
        ___   0 to 70 degrees C
        ___ -40 to +85 degrees C /C/  (Option ET)
 
___ LOW NOISE BOND OUT & TEST FLOW - MC68LNC05P1A -  internal use only:
                                                       check PI sheet
    ___ STANDARD TEST
        VOLTAGE SUPPLY:
        ___ 5V +/- 10%   (4.2 MHz max. external oscillator frequency)
        ___ 3.3V +/- 10% (2.0 MHz max. external oscillator frequency)
        TEMPERATURE RANGE:
        ___   0 to   70 degrees C
        ___ -40 to  +85 degrees C /C/  (Option ET)
        ___ -40 to +105 degrees C /V/  (Option ET)
 
    ___ LOW VOLTAGE TEST (Option LP)
        VOLTAGE SUPPLY:
        ___ 5V +/- 10%   (4.2 MHz max. external oscillator frequency)
        ___ 1.8V to 3.6V (1.0 MHz max. external oscillator frequency)
        TEMPERATURE RANGE: 0 to 70 degrees C
 
    ___ HIGH SPEED TEST (Option HS)
        VOLTAGE SUPPLY:
        ___ 5V +/- 10%   (8.0 MHz max. external oscillator frequency)
        ___ 3.3V +/- 10% (4.2 MHz max. external oscillator frequency)
        TEMPERATURE RANGE:
        ___   0 to 70 degrees C
        ___ -40 to +85 degrees C /C/  (Option ET)
 
------------------------------------------------------------------------
 
EXTERNAL OSCILLATOR FREQUENCY:
 
_________________________
 
PRODUCTION PACKAGE TYPE:
___ 28 pin plastic DIP (P)
___ 28 pin SOIC (DW)
___ 28 pin SOIC tape & reel (DWR2)
___ scribed die probed at 25 degrees C only (SCC): MC68HC05P1A only
___ die in wafer form probed at 25 degrees C only (SCW): MC68HC05P1A only
 
RVU SAMPLE PACKAGE TYPE (choose only one):
___ ceramic equivalent of 28 pin plastic DIP (P)
___ ceramic equivalent of 28 pin SOIC (DW)
___ scribed die probed at 25 degrees C only (SCC)
___ none (no RVUs to be sent to customer/ship to production orders only)
 
MARKING ON PACKAGED PRODUCTION MCUS:
 
___ standard Motorola marking:
 
    DIP:  line 1:  Motorola Logo  Motorola SC number
          line 2:    5 character Motorola mask set
          line 3:     Motorola traceability code
 
    SOIC: line 1:           Motorola SC number
          line 2: Motorola Logo   Motorola traceability code
 
___ customer marking in addition to the standard Motorola marking:
 
    _________________________            maximum: 14 characters per line
                                             DIP:  2 customer lines *
    _________________________               SOIC:  1 customer line *
 
    * The Motorola SC number will not appear on the package if all
      additional customer lines are used.  Marking the packages with the
      Motorola SC number will facilitate the manufacturing process.
 
    The Motorola Logo and copyright symbol use 2 characters each.
 
    DIP  marking maximum: total of 4 lines, 14 characters per line.
    SOIC marking maximum: total of 2 lines, 14 characters per line.
 
============================= MC68HC05P1A  ================ rev 06/28/94