MX3282A


Home Up AMPEG SVP-Pro AudioTronics Carvin DMX MX3282A eDrum kit

 

 

These are pictures of optioning Auxiliaries from Pre Fader (Post EQ) to Pre EQ on each channel.  The existing trace has to be broken then a jumper soldered to two pads.  

 

IMG_2636.JPG (1233311 bytes)This is the factory trace to be broken.  I went down the boards, scraped the trace with a knife and metered each trace with a continuity (ohm) meter for an open indication.  

IMG_2639.JPG (1307781 bytes) That is small!  The coiled cord is an anti static strap from my wrist to the mixer metal case.  

 It is winter and dry.  There is a lot of static build up. 

Better safe than sorry! 

IMG_2638.JPG (1208324 bytes)Adding a dab of rosin core solder. 

IMG_2642.JPG (1144503 bytes) Pre tinned length of 26 gauge bare copper telephone wire. 

IMG_2644.JPG (1018287 bytes) Bend it towards the second pre-tinned solder pad and touch with the iron. 

IMG_2645.JPG (1038004 bytes)Snip off extra and repeat 35 more times including the four stereo channels 29-32. 

IMG_2646.JPG (210629 bytes) Fineto' 

 

All new straps were tested for continuity.  And adjacent traces next to the broken/scraped off trace were tested for continuity to the nearest via's.  These continuity tests insured that I did not scrape off or break an adjacent trace.   I hate to open up a unit to trouble shoot problems or discover the problems during a live gig.

 

 

Hit Counter

 

 

 Contact me including your thoughts and comments. 

Please see the LINKS page.  I have collected many resources over the years.

135,912 unique web site visitors (14,499,000 hits) from October 2004 through August 2011.

Copyright © 2004 - 2012. All rights reserved.