Evaluation Kit for Spreeta Technology

	Product Information
	What will you do with Spreeta Technology
	Quality Control Process Control Affinity Analysis Chemical Concentration Refractive Index Sensing The Kretschmann Geometry Calendar Of Events
	Applications
	Beverage Defense Diagnostics Process Control Water Quality and Safety Food Quality and Safety
	Technical Information
	Evaluation Kit Evaluation Kit User's Information Frequently Asked Questions About the Evaluation Kit Spreeta Evaluation Kit Order Form
	Disclaimer MS-Windows is a trademark of Microsoft Corporation. This test kit is being sold by Texas Instruments (TI) for evaluation purposes only and not for commercial use and is not designed to be used in any manner for medical or any other critical application. TI makes no warranties to the buyer, either express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. TI shall not be liable to a buyer for any direct or indirect damages, including but not limited to incidental, special and consequential damages of any kind. TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein, nor does TI warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such TI products or services might be or are used.
	We have designed a Flow Cell Assembly that will allow the sensing of very small volumes. The Flow Cell Assembly simply clamps onto the Spreeta Sensor and is ready to go!

Spreeta^TM Evaluation KIT

Texas Instruments is offering a complete miniature integrated surface plasmon resonance (SPR) Evaluation Kit for $2,999.

SPR Module

The Flow Cell Accessory
Spreeta^TM Evaluation KIT

The Spreeta^TM Evaluation Kit includes a Spreeta liquid sensor and all of the components needed to interface the sensor to your PC: sensor control box, sensor cable, serial communications cable and software. A flow cell is also supplied. The Evaluation Kit features a comprehensive Windows program that allows maximum sensor versatility and advanced data analysis algorithms. The kit comes complete and ready to use.

The Evaluation Kit documents and information are available in ENGLISH ONLY.

For help and technical questions send E-Mail to: spreeta@ti.com

Components

Hardware:
Spreeta miniature integrated SPR liquid sensor
Spreeta control box
Flow Cell Assembly
AC adapter (US only)
Sensor cable
PC serial port cable
Manual
Registration card (with a great deal on it)

Software:
SPR_MINI program (MS-Windows)

Specifications:
Host Computer Hardware
Type: PC 386, 486, or above
Bus: 16 bit ISA
Hard Drive: 5MB
Floppy Disk: 1.44MB
Mouse: Not required but recommended
Monitor: VGA
Serial COM Port: 9600 baud
Host Computer Software O/S: MS-Windows 3.1 or better

Environmental

Control Box Size: 5" x 4" x 1"
Sensor Cable Length: 3'
Sensor Operating Temperature: 14 - 40° C

Flow Cell Assembly

The Flow Cell Accessory

The principle of construction is a simple one. Side Plates are clamped directly onto the Spreeta Sensor. The Fluidic assembly is bolted to the side plates. The Flow Cell Channel is formed in the Gasket material and is 2mm x 10mm x <0.5mm*.

(* This dimension depends on the degree of compression of the gasket material.)

Fluidic connections are based on the fact that a teflon tube of a given diameter forms a leak-free slip-fit when inserted into a smaller hole in a teflon block.

In addition, a black box has been provided that can be used to house the Flow Cell Assembly and block ambient light.

The Flow Cell Assembly documents and information are available in ENGLISH ONLY.

Components:

Item		Quantity
1/2" long 4-40 Phillips-head bolts		6
1/8" thick SS Backing plate		1
1/4" thick Teflon Connector Plate		1
Black Anodized Aluminum Wing Plates		2
1/2 mm thick Solid Teflon Gasket		1
1/2 mm thick Soft Teflon Gasket		2
1/32" thick silicone gasket		1
Black Box with cable feedthru		1
6" long Teflon Tubes (1/16" OD)		2
4" Silicone tubes (1/8" OD, 0.010" ID)		2
1.5" C-Clamp		1
Instruction Manual		1

For help and technical questions
E-Mail: spreeta@ti.com