4230 Perpetuum-Ebner turn table.

Comes in Stereo or Monaural flavor.

Saba Phono Super 125

Saba Phono Super 125

Push the tone arm to the right to start the platter motor.

This crystal cartridge has low output. It has been replaced. The 33-45 needle was worn out. The tone arm skated across the records. But not with a new needle.

The motor switch-off cam needed adjusted. The motor shuts off at the end of record.

I used two fruit crates as a work support. The power computer speaker was a convenient monitor.

Grundig 3089PH with a Perpentuum-Ebner 4320 turn table with mono crystal cartridge.

A new crystal replacement cartridge (not shown) has been installed.		This idler wheel's bushing is too large for the spindle. It must be a replacement. I am looking for a proper replacement.

			Measured for a replacement belt.	There was no belt.	String to measure for a new belt.
	PE 30 specifications.	This will be replaced. I want no failures once it leaves the shop.		Old, hard and sanded smaller. Will be replaced/rebuilt.

	Unfortunately, this pulley was gouged and too small. The strobe showed a slow pattern with the new belt installed. I suspect some one tried to convert the turntable from 50 to 60 Hz. So with nothing to loose, I used automotive body putty to build up the shaft. I started to trim and shave the shaft to a convex shape. Use the motor to spin the pulley. I need to check the speed with the new idler wheel before filing any more. If the putty does not work then on to metal filled epoxy. If that does not work I will look for a new pulley or have one turned. The black tube is a shop vacuum cleaner to catch the putty dust. The Bondo (auto body filler) worked great!
These are the vendors I ordered parts to rebuild this turntable. You can benefit from my hours of research and emails.
FBL6.6 Flat Belt, Large 6.6 Inch This is the new belt I ordered.	AC caps from Mouser.	Musonic (UK) Limited NEW DC284OV Mono Cartridge Copy The mount needs some "customization" to fit the head shell. And it is a tight fit. Sounds GREAT!	I sent the idler off for rebuilding. And the rebuilt one works GREAT!	Free printable strobe disks.